ISO 4017 Grade 8.8 Dimensional standard as per ISO 4017. Size. Pitch (p) Width across corner (e) Width across Flat (s) Head Thickness (k) Thread Length b. Transition Diameter da. Dia. of washer face dw. Radius under head r. Depth of washer face c. Major Diameter (D) Pitch Diameter (D1) Minor Diameter (D2) MM. Min. Min. Max.

ISO 4017 Alias. French (fr): ISO 4017 Vis à tête hexagonale avec filetage jusqu'à la tête. German (de): ISO 4017 Sechskantschrauben mit Gewinde bis Kopf. Italian (it): ISO 4017 Viti a testa esagonale con gambo interamente filettato. Dutch (nl): ISO 4017 Zeskantbouten met schroefdraad tot kop. Czech (cs): ISO 4017 rouby se estihrannou

The Fully Threaded ISO 4017 hexagon Head Screws are usually coarse threaded and are used in different types of applications. The nuclear power, wind towers, construction, railways and automotive industries use the ISO 4017 Bolts for the high tensile strength. The material also has good corrosion resistance against general corrosive agents and

Note: it is a requirment of ISO 4017 standard theat the bolt nut & washer should be assembled and supplied by one manufacturer who shall be respnsible for the function of the assembly. all the components are identified with the manufacturer Id.Coating of the fasteners shall beas per standard Bolt Drwaing Hex Bolt

Customer care. +41 22 749 08 88. [email protected]. Opening hours: Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)

Is ISO 4014 full thread? ISO 4017 Fully-threaded, ISO 4014 Partially threaded. Is 4014 a fastener? This International Standard specifies the characteristics of hexagon head screws with threads from M1. 6 up to and Including M64, of product grade A for threads M1.

ISO 4017 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product standards for fasteners . This fourth edition cancels and replaces the third edition (ISO

ISO 4017:1988. w. 9699. ICS > 21 > 21.060 > 21.060.10. ISO 4017:1988 Hexagon head screws — Product grades A and B. General information

ISO 4017 A4-80 M 12X40 - Hexagon head screws.

DIN EN ISO 4017 - Hexagon Head Screws — Product Grades A and B ; Screw Thread d. M1.6, M2, M2.5, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18) 

26 rows · ISO 4017 Hex Head Cap Screws are fully threaded, which makes them also known as tap bolts. The width across flats (wrench size) of three sizes—M10, M12 and M14—is 1 mm

19 rows · ISO 4017 - Bolt Dimension Dimensional Standard of Bolts per ISO 4017 • For hot-dip galvanized nuts, the dimensions apply before galvanizing. • P is the pitch of thread. • dw, max.

ISO 4017: specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is the shorter.

Hexagon bolts M6S, strength class 10.9 ISO 4017/DIN 933 Fully threaded, ISO 4014/DIN 931 Partially threaded.

ISO 4017 Hex Screws - Boltport Fasteners Home Weights ISO 4017 Weight Chart for ISO 4017 Hex Screws Weights are in kilograms per 1,000 pieces unless otherwise specified. All weights are approximations and strictly informative.

DIN 933 / ISO 4017 Fully Threaded Hex Cap Screw. 8.8 Grade Bare Steel / Zinc Plated; 8.8 Grade Hot Dip Galvanized (ISO FIT) 10.9 Grade Bare Steel; 12.9 Grade Bare Steel; A2/A4 Stainless Steel; Brass; DIN 960 / ISO 8765 Partially Threaded Hex Cap Screw (Fine Thread) 8.8 Grade Bare/Zinc (1st Fine)

Hex Head Bolts ISO 4017 from materials 25CrMo4+QT, 42CrMo4+QT, 21CrMoV5-7+QT and also from ASME materials B7,L7, B16 and stainless B8 and B8M.

ISO 4017: specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter.

ISO 4017: (E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.

Hexagon Head Screw 8.8 M8x30 ISO 4017 (DIN 933) Steel Right Zinc Plated. €0.08. €0.10 (VAT incl.) Total Stock: 2360 units. Brand: Fabory.

SKU: DIN 933, ISO 4017, CSN 021103, PN 82105, UNI 5739, EU 24017 ; Legend: l – length of bolt d – the nominal diameter of the thread k – head height r – radius e 

ISO 4017 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product standards for fasteners. This fourth edition cancels and replaces the third edition ( ISO 4017:1999 ), of which it constitutes a minor revision. Introduction

ISO 4017: specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and

ISO 4017: specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is the shorter.

ISO 4017: (E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing

Commercially, the steel quality used to manufacture of the ISO 4017 grade 8.8 bolts includes Grades A2 and A4 class 70 . The tensile strength for both these steel grades is around 700 Mpa. The strength of the ISO 4017 bolt M10x18 is indicated by the marking on the head and it is also defined by the applicable product standard.